#protectsyou
Dr. Albert

Dr. Albert

Protective mask

Particle filtering half mask without valve MPR-1200
Filtering efficiency ≥ 94%
Class FFP2 NR
EN 149:2001+A1:2009
Comfortable breathing
PRODUCT COMPOSITION

The mask is made of non-woven textile material, 100% polypropylene.

The fastening system consists of a metal band adjustable to the shape of the nose and elastic bands/cords.

PRODUCT DESCRIPTION

The mask acts as a barrier for particles and viruses in the inspired air (filters the particles)

The textiles used are compatible with the skin: they do not contain fiberglass, calcium carbonate or cytotoxins.

INSTRUCTIONS FOR USE

Open the mask by pulling on the elastic bands and ensure that the metallic element is on the upper side of the mask.

Place the mask on your chin and then pull it over your nose, so that your mouth and nose should be completely covered.

Place the elastic bands behind your ears.

Use both hands to secure the mask: using your fingers, press the middle of the fastening strip in the nose area, then keep pressing towards the ends of the metallic strip.

Check for tightness: cover the protective mask with both palms, in such a way as not to disturb the placement of the mask on your face, then exhale suddenly, checking if the air escapes in the nose area. If you feel the air escaping by the fastening metallic strip, check that it is well pressed against your face.

REMOVAL INSTRUCTIONS

Avoid touching the 2 sides of the mask, the manipulation of the mask shall be done with the aid of the elastic strings.

Hold the 2 elastic strings and remove the mask from your face.

After its removal, dispose of the used mask.

After disposing of the mask, wash your hands with soap and water, before touching any other surfaces.

WARNINGS AND RECOMMENDATIONS

It is recommended that the mask not be used for more than one shift or if it gets wet or damaged.
It is not recommended to use the mask in a low oxygen environment, during sleep or in potentially explosive areas.
Caution is advised when using the mask for people with asthma or other respiratory conditions.

For your safety, we recommend that you check the following before using the mask:
1. Check that the mask fits your face.
2. The mask is not damaged or contaminated.
3. The elastic bands are not damaged and have elasticity.
4. The metal band is not damaged or detached.

STORAGE INSTRUCTIONS

Keep away from sunlight, humidity and dust. Masks should be stored in a clean and dry area. Recommended storage conditions: temperature between -20°C and +25°C, humidity <80%. The product is manufactured according to the provisions of Regulation (EU) no. 425/2016

VALIDITY
5 years
Certification Body: GÉPTESZT Kft. Identification number: 2233 Address: Jablonka St. 79, 1037 Budapest, HUNGARY The product is manufactured according to the provisions of the Regulation (EU) no. 425/2016. Personal protective equipment, category III.
DIMENSION
Length: 155 mm +/- 5 mm
Width: 107 mm +/- 5 mm
Maximum opening: 170 mm
1 pcs./batch
10 pcs./box

BENEFITS

1
ENSURES COMFORTABLE BREATHING
2
ODOUR-FREE, NO PROHIBITED SUBSTANCES USED
3
THEY ARE NON-IRRITANT, HYPOALLERGENIC
4
CLAMPING SYSTEMS ARE LIGHT AND THE METAL WIRE TAPE ENSURES THE CORRECT POSITIONING OF THE MASK
5
THEY ARE PRODUCED EXCLUSIVELY OF NONWOVEN MATERIAL, AND THE INNER LAYER IS FILTERED
ODOUR-FREE, NO PROHIBITED SUBSTANCES USED
Non-Woven-Material Comfortable breathing
ODOUR-FREE, NO PROHIBITED SUBSTANCES USED